| HTU-112 - Hydroextrusion Thinning Unit | |
| Input wire diameter | 1.5mm | 0.06in |
| Output wire diameter | 0.9-0.1mm | 0.035-0.004in |
| Reduction ratio | 65%/pass |
| Extrusion speed | 0.5-10m/s | 1.65-33ft/s | controlled by flow or pulling |
| Working parameters | |
|
water with anticorrosive additives |
|
12l | 3 USgal |
|
250MPa | 36000psi |
| Supply voltage | 3x380V 50Hz |
| Control system voltage | 24V |
| Power consumption | 2.5kW | 3.35 HP |
| Hydraulic suply pressure | 16MPa | 2320psi |
| Hydraulic supply system power | 22kW | 30HP |
| Working chamber size | 100mm | 3.94in |
| Weight: | |
|
1200kg | 2645lb |
|
200kg | 440lb |