MWD-112/3/12 - Heavy Wire Drawer MWD-112/2/3 - Fine Wire Drawer
Input wire diameter 12mm | 3in (max 16mm) 3mm | 0.125in (max 4mm)
Output wire diameter 3mm | 0.125in 0.4 mm | 0.016in
Number of shafts 3 2
Number of dies 21 26
Die height 38mm | 1.5in 28mm | 1.1in
Die external diameter 15mm | 0.6in 15mm | 0.6in
Drawing speed range 0.5÷1.5m/s | 1.65÷18ft/s 0.5÷6m/s | 1.65÷18ft/s
Supply voltage 3x380V 50Hz 3x380V 50Hz
Control system voltage 24V 24V
Motor power 15kW | 20HP 7.5kW | 10HP
Cooling system    
  • die and shaft spray
standard standard
  • heat exchanger
standard standard
Water consumption 10÷20l/min | 2.7÷5.4USgal/min 10÷20l/min | 2.7÷5.4USgal/min
Water pressure 2bar 2bar
Water inlet diameter ½in ½in
Production capacity max 450kg/h max 275kg/h
Take-up system    
  • freely to the container
standard standard
  • wire spooler
 optional optional
Auxiliary tooling    
  • wire break monitoring
standard standard
  • automatic stop
standard standard
  • die pre-pulling assembly
standard optional
Dimensions (LxWxH) 2500x1250x1800mm 1400x1200x1800mm
Weight 1600kg | 2500lb 1200kg| 2500lb